Mains Power Controller 1 Remote Controll 3 Outlet

The switch that reduces the 'Standby' power leak in your home. Reduce your carbon footprint and cut your power bill.

Up to 10% your power bill is used by appliances in standby mode!

Easy to install(no electrician required) and easy to operate, this mains power sits between your power board and your power point, operated by a wireless remote. Enjoy peace of mind and lower power bills. It's the affordable solution to helping you switch off waste and switch on to saving energy and money.

This video is only for demonstration purpose, the real product is slightly different
Thank for the video comes from citysoftware.

• Switch up to 3 power outlets on and off using a emote control
• Saves stand-by power
• Saves from your electricity bill
• Can be used in conjunction with a power board

• Fixed code transmitter
• Each transmitter can control up to 4 channels
• Radio frequency: 433.92MHz
• Remote max. range: 30 meters(direct line of sight)
• Remote battery: 27A 12V(Not included)
• Current: 240VAC,50Hz, 10 (2) A
• Max.Load: 2400W
• Controller powered by 1 PC.27A 12V battery(Not included)

Functions:

• It is an innovation-designed receiver which is random code-learning with the corresponding multi-channel transmitter. The operation is very easy to the users
• The receiver can be adjusted easily by a rotary switch. It is necessary to change code while the transmitter is interfered by other transmitters nearby.
• The receiver, should be installed at a place people hardly approach it, could be long-distance remote controlled. It is very convenient for the users.
• There is voltage surge protection inside the receiver which make the appliance free from voltage impact
• The red LED indicates the Power ON/Off status

• It is an innovation-designed wireless multi-channel transmitter which is random code-jlearing with the corresponding multi-channel wireless receivers. The operation is very easy to the users
• The transmitter can be adjusted easily by a rotary switch. It is necessary to change code while the trqansmitter was interfered by other tr4ansmitters nearby.
• Every transmitter can control up to 4 channels.While each channel can control several receivers.
• LED can indicates the signal transmission status

• 12 months

• 1 x Wireless multi-channel transmitter Controller
• 3 x Receiver Mains Power
• 1 x Manual